CB06551是一種數字伺服放大器，由科爾莫根生產。它 具有多種功能和特點，包括支持相位故障監控、短路保護和過壓識別，具有兩個模擬監控輸出和兩個可編程數字輸出，并支持緊急停止功能。該設備還必須與電源、扼流圈和濾波器盡可能靠近地安裝在機柜內的接地導電安裝板上。此外，CB06551伺服放大器可能由于錯誤或不合適的電機接線以及錯誤的電源電壓而損壞。
CB06551的過壓識別和短路保護是通過其內置的電路和功能實現的。
過壓識別是通過設備內置的電壓監控器實現的。當電源電壓超過預設的安全范圍時，監控器會觸發過壓保護機制，關閉設備或觸發警報，以防止設備受損和避免潛在的危險。
短路保護則依賴于設備內置的短路保護電路。當設備的輸出端發生短路時，該電路會迅速切斷電源或觸發警報，以防止設備過熱和損壞，同時保護人員免受電擊傷害。

CB06551

The CB06551 is a digital servo amplifier manufactured by Kermogen. It has a variety of functions and features, including support for phase fault monitoring, short circuit protection, and overvoltage identification, with two analog monitoring outputs and two programmable digital outputs, and support for emergency stop. The device must also be mounted as close as possible to the power supply, choke, and filter on a grounded conductive mounting plate in the cabinet. In addition, the CB06551 servo amplifier can be damaged due to wrong or inappropriate motor wiring and wrong supply voltage.
The CB06551’s overvoltage identification and short circuit protection is achieved through its built-in circuitry and functions.
Overvoltage recognition is achieved by the voltage monitor built into the device. When the power supply voltage exceeds the preset safety range, the monitor triggers the overvoltage protection mechanism, shutting down the device or triggering an alarm to prevent damage to the device and avoid potential hazards.
Short circuit protection depends on the short circuit protection circuit built into the device. When a short circuit occurs in the output of the device, the circuit quickly cuts off the power or triggers an alarm to prevent overheating and damage to the device, while protecting the person from electric shock.

CB06551

其他型號推薦：

CB06551