1394-SJTO5-C-RL GMC系統模塊 集成的運動控制系統

A 1394-SJT05-C-RL是一種GMC系統模塊，支持四(4)軸模塊和四(4)通道輔助輸入通道。模塊的輸入電壓為交流380 / 460伏，三相，輸入頻率為50/ 60hz，電流為6.5安培。輸出電壓530/680V直流，連續輸出功率4/5千瓦，峰值功率28千瓦。連續輸出電流為7.36 A，峰值電流為15.0安培。該系統模塊集成了RIO和AxisLink。

1394-SJT05-C-RL是一個標準的GMC系統模塊，具有集成的遠程I/O (RIO)和AxisLink通信端口。

遠程I/O和AxisLink通信端口位于模塊的左上角，安裝了診斷l(xiāng)ed。遠程I/O允許任何1394系統模塊與Allen-Bradley制造的位置控制器進行通信。系統模塊上安裝了2個類似的連接器，標簽分別為CHAN A/P3和CHAN B/P4。對于建立物理遠程I/O (RIO)連接，Allen-Bradley建議使用AB1770 CD Belden 9463電線或等效電纜。此電纜也是其他Allen-Bradley產品RIO通信的推薦電纜。當將遠程I/O電纜連接到兩(2)個RIO通道中的任何一個時，藍色線必須連接到端子1，屏蔽線連接到端子2，透明線連接到端子3。RIO網絡需要安裝終端電阻。該終端電阻安裝在RIO通信網絡的第一個和最后一個節點上。

AxisLink可以通過網絡傳輸數據。該協議支持8個節點，主要用于同步運動應用程序。節點可以由8個GMC系統模塊組成，也可以由ALEC和GMC系統模塊的任意組合組成。使用此通信協議，可以使用1394系統模塊作為主軸，可用于電子傳動，凸輪和其他系統。AxisLink部分的最大長度為25米或82英尺。

Allen-Bradley 1394-SJT05-C-RL伺服控制器模塊是一個集成的運動控制系統，在系統中具有多達4軸和4輔助編碼器輸入。它增強了智能電源，EMI濾波和終端。1394-SJT05-C-RL的輸入電壓為交流360-480V，輸入電流為6.5A。它的輸出峰值電流為975A，額定直流輸出電壓為530-680V。1394-SJT05-C-RL額定功率為4-5KW，可以擴展到最大28KW。該1394-SJT05-C-RL伺服控制器模塊是一個系統模塊，具有99%的操作效率。它的輸出電流為7.36A，峰值為156A。1394-SJT05-C-RL伺服控制器模塊的環境溫度范圍為0-50攝氏度(32-122華氏度)，相對濕度為5-95%，非冷凝作為其環境規格。它的最大沖擊等級為15G，振動可達1G。1394-SJT05-C-RL的電感為1000 microH，電容為2200 microof。每百分比輸出功率的耗光功率分別為66W (20%)， 70 w (40%)， 73W (60%)， 77W(80%)和80W(100%)，重量為11公斤(24.25磅)，支持98%的效率，艾倫-布拉德利1394-SJT05-C-RL伺服控制器是一個具有GMC- IMC S級，AxisLink和遠程I/O GMC選項的系統。

1394-SJTO5-C-RL GMC系統模塊 集成的運動控制系統

A 1394-SJT05-C-RL is a GMC system module that supports four (4) axis modules and four (4) channel auxiliary input channels. The input voltage of the module is AC 380/460 volts, three phases, the input frequency is 50/60 Hz, and the current is 6.5 amps. Output voltage 530/680V DC, continuous output power 4/5 kW, peak power 28 kW. The continuous output current is 7.36A and the peak current is 15.0 amps. The system module integrates RIO and AxisLink.

The 1394-SJT05-C-RL is a standard GMC system module with integrated Remote I/O (RIO) and AxisLink communication ports.

The remote I/O and AxisLink communication ports are located in the upper left corner of the module with a diagnostic led installed. Remote I/O allows any 1394 system module to communicate with the Allen-Bradley manufactured position controller. Two similar connectors are installed on the system module, labeled CHAN A/P3 and CHAN B/P4. For establishing a physical remote I/O (RIO) connection, Allen-Bradley recommends using the AB1770 CD Belden 9463 wire or equivalent cable. This cable is also recommended for other Allen-Bradley products for RIO communications. When connecting a remote I/O cable to either of the two (2) RIO channels, the blue wire must be connected to terminal 1, the shielded wire to terminal 2, and the transparent wire to terminal 3. The RIO network requires installation of terminal resistors. This terminal resistor is installed on the first and last node of the RIO communication network.

AxisLink can transmit data over the network. The protocol supports 8 nodes and is primarily used for synchronous motion applications. A node can consist of eight GMC system modules or any combination of ALEC and GMC system modules. With this communication protocol, it is possible to use the 1394 system module as a spindle, which can be used for electronic drives, cams and other systems. The maximum length of the AxisLink section is 25 meters or 82 feet.

The Allen-Bradley 1394-SJT05-C-RL Servo controller module is an integrated motion control system with up to 4 axes and 4 auxiliary encoder inputs in the system. It enhances the smart power supply, EMI filtering and terminal. The input voltage of 1394-SJT05-C-RL is AC 360-480V and the input current is 6.5A. It has a peak output current of 975A and a rated DC output voltage of 530-680V. The 1394-SJT05-C-RL is rated at 4-5KW and can be extended to a maximum of 28KW. The 1394-SJT05-C-RL servo controller module is a system module with 99% operating efficiency. It has an output current of 7.36A and a peak of 156A. The 1394-SJT05-C-RL servo controller module has an ambient temperature range of 0-50 degrees Celsius (32-122 degrees Fahrenheit) and a relative humidity of 5-95%, with non-condensing as its environmental specification. It has a maximum impact rating of 15G and can vibrate up to 1G. The 1394-SJT05-C-RL has an inductance of 1000 microH and a capacitance of 2200 microof. Power consumption per percentage of output is 66W (20%), 70 w (40%), 73W (60%), 77W(80%) and 80W(100%), weight is 11 kg (24.25 lb), support 98% efficiency, The Allen-Bradley 1394-SJT05-C-RL servo controller is a system with GMC-IMC S-class, AxisLink, and Remote I/O GMC options.

其他型號推薦：