基本細節:1746-A7 SLC 500 機箱 通信適配器模塊以及輸入和輸出模塊

1746-A7 是一款 SLC 500 機箱，帶有七 （7） 個插槽。這款 SLC 500 機箱重 1.1 千克（2.4 磅），尺寸為 28.2 x 17.1 x 14.5 厘米或 11.3 x 6.8 x 5.8 英寸。
1746-A7 包含模塊化處理器、通信適配器模塊以及輸入和輸出模塊。該機箱內置 7 個插槽，是 SLC 500 模塊化機箱的一部分，可靈活配置系統。在模塊化系統中，每個機箱都需要自己的電源。SLC 500 1746-A7 模塊化機箱可作為一個獨立單元在一個系統中使用，也可以與另一個或兩個本地機箱配合使用。機箱互連電纜可用于構建多個機箱配置并延長信號線。這最多可以創建總共 30 個 I/O 插槽。將機箱與不同長度的 1746-C9 電纜或 1746-C16 電纜垂直互連。兩根電纜都具有剛性、不彎曲的收縮包裝，用于在將模塊與另一個下方連接時消除應力。對于水平布局，請使用 1746-C7 電纜。請勿使用任何其他電纜進行設置。較長的電纜可能會影響數據通信完整性，從而導致不安全的操作。
從 1746-A7 機箱到接地總線的接地連接可降低電阻。接地時，請勿將一個凸耳直接放在另一個凸耳上。壓縮會導致這些連接松動。1746-A7 的最大背板電流為 5.1 V DC（10A）或 24 V（2.88A）直流電。為獲得最佳性能，請?jiān)?0 攝氏度至 60 攝氏度（32 至 140 華氏度）的溫度和 5% 至 95% 的相對濕度（無冷凝）下運行。
1746-A7 是一款 SLC 500 機箱，可安裝到 SLC 500 模塊，例如 SLC 處理器、SLC IO 模塊、SLC 通信適配器和專用模塊。
1746-A7 具有七 （7） 個插槽，通過從控制器所在的主機箱連接另外兩 （2） 個機箱，可以擴展至 21 個模塊。這是通過使用部件號為 1746-C9、1746-C7 的互連電纜和其他不同長度的互連電纜來完成的。每個機箱都需要單獨的電源，但只需要一個 SLC 500 處理器。此處理器應固定或安裝在主機箱上。擴展機箱被視為遠程 IO 機架。
SLC 500 配備其他型號的底盤，包括 1746-A13、1746-A10 和 1746-A4。所有這些機箱，包括 1746-A7 都有一個嵌入式電子電路，該電路連接到電源插槽。該電路用作背板，將電源分配給插入的模塊。它還充當處理器和模塊之間交換的信息，因此，沒有機箱就無法操作 SLC 500 模塊化控制器。

1746-A7

The 1746-A7 is an SLC 500 chassis with seven (7) slots. The SLC 500 case weighs 1.1 kilograms (2.4 pounds) and measures 28.2 x 17.1 x 14.5 centimeters or 11.3 x 6.8 x 5.8 inches.
The 1746-A7 contains a modular processor, communication adapter module, and input and output modules. The seven slots are part of the SLC 500 modular chassis for flexible system configuration. In a modular system, each case requires its own power supply. The SLC 500 1746-A7 modular chassis can be used as a standalone unit in one system or in combination with another or two local chassis. Chassis interconnection cables can be used to build multiple chassis configurations and extend signal lines. This can create up to a total of 30 I/O slots. Vertically interconnect the chassis with 1746-C9 cables or 1746-C16 cables of different lengths. Both cables have rigid, non-bending shrink wrap for stress relief when connecting the module to the underside of the other. For horizontal layout, use 1746-C7 cable. Do not use any other cable for setup. Longer cables may compromise data communication integrity, resulting in unsafe operations.
A ground connection from the 1746-A7 chassis to the ground bus reduces resistance. Do not place one lug directly on the other lug when grounded. Compression can cause these connections to loosen. The maximum backplane current of the 1746-A7 is 5.1 V DC (10A) or 24 V DC (2.88A). For best performance, run at temperatures ranging from 0 ° C to 60 ° C (32 ° F to 140 ° F) and 5 to 95% relative humidity (no condensation).
The 1746-A7 is an SLC 500 chassis that can be installed into SLC 500 modules, such as SLC processors, SLC IO modules, SLC communication adapters, and dedicated modules.
The 1746-A7 has seven (7) slots and can be expanded to 21 modules by connecting another two (2) enclosures from the main enclosure where the controller resides. This is done by using interconnect cables with part numbers 1746-C9, 1746-C7 and other interconnect cables of different lengths. Each case requires a separate power supply, but only one SLC 500 processor is required. The processor should be fixed or installed in the main box. An extension chassis is considered a remote I/O rack.
The SLC 500 was equipped with other chassis models, including the 1746-A13, 1746-A10, and 1746-A4. All of these cases, including the 1746-A7, have an embedded electronic circuit that is connected to a power socket. This circuit acts as a backplane to distribute power to the inserted module. It also acts as the information exchanged between the processor and the module, so the SLC 500 modular controller cannot be operated without a chassis.

如果您需要查詢或購買，請將產品型號發送到我的電子郵件或直接致電我

銷售經理:何經理

手機: + 86 18005021035

郵箱:?18005021035@163.com

與成都陽光熹禾合作我們提供一流的服務，實現更快的速度，交付多樣化的零件!

1.在24小時內及時回復您

2.交貨時間快

3.最好的服務，合理的價格

4.在生產線上工作多年，有良好的口碑

▲更多相關型號: 1746-A7 SLC 500 機箱 通信適配器模塊以及輸入和輸出模塊