靈敏度3.94mV/mm/s (1mv /in/s)±。
頻率
響應
4.5 Hz至5 kHz (27cpm至3)
kcpm)±3.dB。
6.Hz至2.5 kHz (36cpm至15)
kcpm)±.9 dB。
溫度
靈敏度
-到+7.
工作溫度范圍
速度范圍127mm /s (5in/s)峰值。
3500 TDI(暫態數據接口)是3500之間的接口監控系統和GE的sstem 1*機城管理軟件。的TD結合了3,500 /20機架接口模塊RIM)的能力數據收能力的通信處理器，如TDXnet，TD與M系列一起在3500機架的RIM槽中運行監視器(3500/40M,3500/42M等連續采集穩態和態波形數據并將該數據通過以太網鏈路傳遞給主機軟件(請參閱本文檔未尾的兼容性部分。)靜態數據捕獲是TD的標準配置，但是使用一個可選的通道啟用磁盤將允許TD|捕獲動態或瞬態數據。的與以前的通信相比，TDI在幾個方面進行了改進并將通信處理器功能集成到3500架

138607-01

盡管TD提供了整個機架通用的某些功能，但它并不是部分關鍵監控路徑，對下常，下常無影響整人監控系統的運行，每3500機架更要一人TD減RIM，它總是占用槽位1電源旁邊)。對于三模幾余(TMR)應用，3500系統需要一個TMR版本的TD1，除了所有標TD功能外，TMR TDI還執行”監視器通道比較”。3500tmr配置使用監控器選項中指定的設置執行監控器投票，使用在這種方法中，TMR TDI不斷地比較二(3)的輸出。多余的監視。如果TDI檢測到來自其中一個的信息監視器不再等同于其他監視器在配置的百分比內)兩個監視器，它將監視器標記為錯誤，并將事件放置在
系統事件列表。

本特利內華達提供資產績效管理解決方案。資產健康管理、資產戰略管理和缺陷消除的應用由分析洞察提供支持，建立在全廠狀態監測功能之上，現在可以擴展到整個企業。縮小可靠性“目標”與從當前工作中實際獲得的差距通常涉及三個關鍵影響領域：綜合服務可幫助客戶評估其目標，識別當前運營中的可靠性差距，然后實施適當?shù)募m正措施。本特利內華達產品線以機械狀態監測質量而聞名于世。從傳感器到連續監測系統，從無線傳感器系統到便攜式數據采集器和分析儀，處理水和廢水處理廠資產所需的一切。而且，所有這些都集中在一個統一的資產狀態監測和診斷平臺中 – 本特利內華達的System 1軟件。還協助客戶集成和使用他們已安裝的工具，例如計算機化維護管理系統（CMMS）和可靠性軟件。

138607-01

Sensitivity 3.94mV/mm/s (1mv /in/s)±.
frequency
respond
4.5Hz to 5 kHz (27cpm to 3)
kcpm)±3.dB.
6.Hz to 2.5 kHz (36cpm to 15)
kcpm)±.9 dB.
temperature
sensitivity
– To +7.
Operating temperature range
Speed range 127mm /s (5in/s) peak.
3500 TDI(Transient Data Interface) is the interface between the 3500 monitoring system and GE’s sstem 1* city management software. The TD combines the capabilities of 3500/20 rack interface module RIM) with the data receiving capabilities of communication processors such as TDXnet, Together with the M Series, the TD runs a monitor in the RIM slot of the 3500 rack (3500/40m, 3500/42m, etc.) to continuously collect steady-state and state waveform data and pass this data to the host software over the Ethernet link (see the compatibility section at the end of this document). Static data capture is standard with TDS, but enabling the disk with an optional channel will allow TD| to capture dynamic or transient data. Compared to previous communications, TDI has improved on several aspects and integrated communication processor capabilities into 3,500 units
Although TD provides some functions common to the whole rack, it is not a part of the critical monitoring path, on the lower, the lower usually does not affect the operation of the integrated monitoring system, every 3500 rack more than one TD minus RIM, it always occupies slot 1 power next). For three-mode multiplex (TMR) applications, the 3500 system requires a TMR version of TD1, which performs “monitor channel comparison” in addition to all standard TD functions. The 3500tmr configuration performs monitor voting using the Settings specified in the monitor options, using this method, the TMR TDI constantly compares the output of two (3). Extra surveillance. If TDI detects that the information monitor from one is no longer equivalent to the other monitors within a configured percentage of both monitors, it flags the monitor as an error and places the event on
List of system events.

Bentley Nevada provides asset performance management solutions. Applications for asset health management, asset strategic management, and defect elimination are powered by analytical insights, built on plant-wide condition monitoring capabilities, and can now be extended across the enterprise. Closing the gap between reliability “goals” and what is actually being achieved from current work typically involves three key impact areas: Integrated services help customers assess their goals, identify reliability gaps in current operations, and then implement appropriate corrective actions. The Bentley Nevada product line is world-renowned for the quality of mechanical condition monitoring. From sensors to continuous monitoring systems, wireless sensor systems to portable data collectors and analyzers, everything you need to treat water and wastewater treatment plant assets. And, all in one unified asset condition monitoring and diagnostics platform – Bentley Nevada’s System 1 software. It also assists customers in integrating and using the tools they have installed, such as computerized maintenance management systems (CMMS) and reliability software.

138607-01