IC698CPE030是可編程自動化控制器(PAC)的PAC系統RX7i中最先進的中央處理器(CPU)之一。這款CPU的設計是為了滿足現代自動化、連接和集成的行業要求。它以前是由GE智能平臺(GE IP)制造的，但隨著艾默生自動化最近的收購，PACSystem RX7i現在是后者的一部分。

IC698CPE030處理器安裝了計算機級微處理器，即600MHz奔騰- m微處理器，具有64mb用戶內存和64mb用戶閃存。它顯示布爾執行速度0.069毫秒每1000布爾觸點/線圈。這個CPU可以容納多達32k位的離散I/O和32k字的模擬I/O。最多可以將512個程序塊下載到該CPU，其中每個程序塊最多可以具有128 KB的內存。

IC698CPE030還具有兩(2)個以太網通信端口，能夠自動感知網絡傳輸速度，并可配置為半雙工和全雙工工作模式。內置的web服務器和文件傳輸協議(FTP)功能可通過這些以太網端口訪問，允許用戶遠程監控和配置處理器。除了內置的以太網端口，

IC698CPE030

這個CPU也有一個(1)RS232端口;1 (1) RS485接口，1(1)站長接口。這些通信接口支持SRTP、Modbus TCP服務器和客戶端、以太網全局數據(EGD)(基于以太網的通信)和Modbus RTU Slave、SNP、串行I/O(串行通信)。

GE Fanuc IC698CPE030 PACSystem Rx7i中央處理器是GE Rx7i系統的奔騰處理器。IC698CPE030 CPU，像所有的Rx7i CPU一樣，安裝在Rx7i I/O機架上，它帶有VME64基礎架構，可兼容新舊VME嵌入式技術，具有快速的吞吐量評級。IC698CPE030 CPU配備600兆赫奔騰M處理器和電池支持的64兆處理器內存，以及用于應用程序和數據存儲的64兆用戶閃存。IC698CPE030處理器可以執行浮點數學和布爾邏輯功能，高級用戶參數可以使用梯形圖、結構化文本、功能框圖和C語言編程。

GE Fanuc IC698CPE030 CPU支持系列90-70離散和模擬I/O模塊，通信模塊，系列90-70支持的VME模塊，以及各種編程和HMI模塊。IC698CPE030 CPU額定直流電壓為+5、+12或-12伏，直流電壓為5伏時背板額定電流為3.4安培。IC698CPE030具有一個隔離的RS-485串口、一個RS-232串口和一個專用的RS-232以太站管理器端口。IC698CPE030具有雙嵌入式以太網(10/ 100mb)端口，提供以太網EGD (Ethernet Global Data)數據交換、TCP/IP高速數據傳輸，支持Modbus/TCP Server、Modbus/TCP Client和SRTP Channel協議，可與程序員和HMI設備通信。IC698CPE030 CPU配置了4.5及以上版本的ME (Proficy Machine Edition) Logic Developer配置軟件，提供先進的應用編程環境，支持通過web服務器和FTP連接進行web數據監控。

IC698CPE030

The IC698CPE030 is one of the most advanced central processing units (cpus) in the Programmable Automation Controller (PAC) PAC System RX7i. This CPU is designed to meet the industry requirements of modern automation, connectivity and integration. It was previously manufactured by GE Intelligence Platform (GE IP), but with Emerson Automation’s recent acquisition, PACSystem RX7i is now part of the latter.

The IC698CPE030 processor is equipped with a computer-grade microprocessor, a 600MHz Pentium-M microprocessor, with 64mb of user memory and 64mb of user flash memory. It shows a Boolean execution speed of 0.069 ms per 1000 Boolean contacts/coils. This CPU can accommodate up to 32k bits of discrete I/O and 32k words of analog I/O. Up to 512 blocks can be downloaded to this CPU, where each block can have up to 128 KB of memory.

The IC698CPE030 also features two (2) Ethernet communication ports that automatically sense network transmission speeds and can be configured to operate in both half-duplex and full-duplex modes. The built-in web server and File Transfer Protocol (FTP) capabilities are accessible through these Ethernet ports, allowing users to remotely monitor and configure the processor. In addition to the built-in Ethernet port,

This CPU also has a (1)RS232 port; 1(1) RS485 interface, 1(1) webmaster interface. These communication interfaces support SRTP, Modbus TCP server and client, Ethernet Global Data (EGD)(Ethernet-based communication) and Modbus RTU Slave, SNP, Serial I/O(serial communication).

The GE Fanuc IC698CPE030 PACSystem Rx7i CPU is a Pentium processor for the GE Rx7i system. The IC698CPE030 CPU, like all Rx7i cpus, is mounted on the Rx7i I/O rack, and it comes with a VME64 infrastructure that is compatible with old and new VME embedded technologies, with fast throughput ratings. The IC698CPE030 CPU is equipped with a 600 MHZ Pentium M processor and 64 megabytes of battery-supported processor memory, as well as 64 megabytes of user flash memory for applications and data storage. The IC698CPE030 processor can perform floating-point math and Boolean logic functions, and advanced user parameters can be programmed using ladder diagrams, structured text, functional block diagrams, and C language.

The GE Fanuc IC698CPE030 CPU supports Series 90-70 discrete and analog I/O modules, communication modules, Series 90-70 supported VME modules, and various programming and HMI modules. The IC698CPE030 CPU is rated at +5, +12, or -12 volts. The backplane is rated at 3.4 amps when the DC voltage is 5 volts. The IC698CPE030 has an isolated RS-485 serial port, an RS-232 serial port, and a dedicated RS-232 Ethernet station manager port. IC698CPE030 has dual embedded Ethernet (10/100mb) ports, providing Ethernet Global Data (EGD) data exchange, TCP/IP high-speed data transmission, Supports Modbus/TCP Server, Modbus/TCP Client, and SRTP Channel protocols to communicate with programmers and HMI devices. The IC698CPE030 CPU is configured with Proficy Machine Edition (ME) Logic Developer configuration software 4.5 or later, which provides an advanced application programming environment and supports web data monitoring through a web server and FTP connection.

IC698CPE030