產品介紹：
型號：SST-PFB3-VME-2-e
使用多個單相計數器時，頻率和必須不大于14KHz。只允許單、雙相速計數器同時使用。當使用雙相計數器時，記數速度必須大于14KHz，計算為（記數邊數為5時，2ph計數器速度）+1ph計數器速度。C235至C238
4點（注意C235被鎖定）
單相c/w起始
停止輸入C241（鎖定）、C242和C244（鎖定）3點
雙相C246、C247和C249（都鎖定）3點
A/B相C251、C252和C254（都鎖定）3點
數據寄存器
（D）一般128點D0至D127
類型：32位元件的16位數據存儲寄存器對
鎖定128點D128至D255
類型：32位元件的16位數據存儲寄存器對
外部調節范圍：0至255 2點通過外部設置電位計間接輸入D8013或D8030&D803114數據
特殊256點（包含D8030，D8031）從D8000至D8255
類型：16位數據存儲寄存器
變址16點V和Z
類型：16位數據存儲寄存器
OPC數據訪問服務器v3.0
通過雙端口RAM接口輕松移植到各種操作系統
設備級別的流程一致性數據
用于存儲配置數據的內部閃存
通過DP配置和網絡診斷軟件實現快速調試
從FDT框架應用中輕松訪問DP-V1和PA變量
Molex/Woodhead SST-PFB3-PCI Profibus接口卡可以連接連接到Profibus DP-V0、DP-V1和FDL網絡的PCI總線計算機。它在自動化之間提供高速確定性通信系統及其分散式外圍設備。
PFB3接口卡專為自動化設計人員開發以及尋求可靠和高性能的控制系統通信解決方案。

SST-PFB3-VME

Product Introduction:
Model: SST-PFB3-VME-2-e
When using multiple single-phase counters, the frequency sum must not be greater than 14KHz. Only single and dual phase speed counters are allowed to be used simultaneously. When using a biphase counter, the counting speed must be greater than 14KHz, calculated as (2ph counter speed when the number of counting sides is 5) +1ph counter speed. C235 to C238
4:00 (note that C235 is locked)
Single-phase c/w start
Stop entering C241 (lock), C242, and C244 (lock) 3 points
Biphasic C246, C247 and C249 (all locked) 3 points
A/B phases C251, C252 and C254 (all locked) 3 points
Data register
(D) Generally 128 points D0 to D127
Type: 16-bit data storage register pair of 32-bit element
Lock 128 points D128 to D255
Type: 16-bit data storage register pair of 32-bit element
External adjustment range: 0 to 255 2 points indirect input of D8013 or D8030&D803114 data via external setting potentiometer
Special 256 points (including D8030, D8031) from D8000 to D8255
Type: 16-bit data storage register
Index 16 points V and Z
Type: 16-bit data storage register
OPC Data Access Server v3.0
Easy port to various operating systems via dual port RAM interface
Process consistency data at the device level
Internal flash memory used to store configuration data
Fast debugging with DP configuration and network diagnostic software
Easy access to DP-V1 and PA variables from within FDT framework applications
The Molex/Woodhead SST-PFB3-PCI Profibus interface card connects PCI bus computers connected to Profibus DP-V0, DP-V1, and FDL networks. It provides high-speed deterministic communication systems and their decentralized peripherals between automation.
The PFB3 interface card was developed for automation designers and those seeking reliable and high-performance control system communication solutions.

SST-PFB3-VME

SST-PFB3-VME