VM600 IOC4T是一種輸入輸出卡，通常用于振動監測和機械設備保護系統中。
VM600 IOC4T模塊用于接收來自各種傳感器和設備的輸入信號，如振動傳感器、溫度傳感器、壓力傳感器等，可以輸出控制信號，用于驅動執行器、繼電器等外部設備，實現對機械設備的控制和保護，還可以對接收到的輸入信號進行數據處理和轉換，例如濾波、放大、線性化等，以提供可用的測量值和狀態信息。此外，該模塊通常配備了通信接口，例如以太網、串行接口等，用于與其他設備或系統進行數據交換和通信。

VM600 機架式機械監控系統使用的 MPC4 和 MPC4SIL 機械保護卡的高質量、高可靠性接口（輸入/輸出）卡。IOC4T卡支持4個動態通道和2個轉速計（速度）通道，所有通道均可獨立配置。IOC4T 接口卡安裝在 VM600 ABE04x 機架的后部，直接位于 MPC4 卡或 MPC4SIL 卡后面，形成卡對。

特征
用于 MPC4 或 MPC4SIL 卡的輸入/輸出（接口）卡 – 支持 4 個動態通道和 2 個轉速計通道

每個動態通道和每個轉速計通道具有傳感器電源輸出的差分信號輸入

每個動態通道的差分緩沖（原始）傳感器輸出

每個動態通道的直流輸出可配置為基于電流的信號（4 至 20 mA）或基于電壓的信號（0 至 10 V）

4 個可配置繼電器，每個繼電器有兩個觸點，以及警報復位 (AR)、危險旁路 (DB) 和跳閘倍增 (TM) 控制輸入

VM600 IOC4T

The VM600 IOC4T is an input/output card commonly used in vibration monitoring and mechanical equipment protection systems.
The VM600 IOC4T module is used to receive input signals from various sensors and devices, such as vibration sensors, temperature sensors, pressure sensors, etc. It can output control signals, which are used to drive actuators, relays and other external devices to realize the control and protection of mechanical equipment, and can also perform data processing and conversion of received input signals. Such as filtering, amplification, linearization, etc., to provide usable measurement values and status information. In addition, the module is usually equipped with a communication interface, such as Ethernet, serial interface, etc., for data exchange and communication with other devices or systems.

The VM600 rackmount mechanical monitoring system uses MPC4 and MPC4SIL mechanical protection cards with high quality and high reliability interface (input/output) cards. The IOC4T card supports 4 dynamic channels and 2 tachometer (speed) channels, all of which can be configured independently. The IOC4T interface card is installed at the rear of the VM600 ABE04x rack, directly behind the MPC4 card or MPC4SIL card, forming a card pair.

trait
Input/output (interface) cards for MPC4 or MPC4SIL cards – supports 4 dynamic channels and 2 tachometer channels

Each dynamic channel and each tachometer channel has a differential signal input for the sensor power output

Differential buffered (raw) sensor output for each dynamic channel

The DC output of each dynamic channel can be configured as a current based signal (4 to 20 mA) or a voltage based signal (0 to 10 V).

Four configurable relays, each with two contacts, and alarm reset (AR), hazard bypass (DB), and trip multiplier (TM) control inputs

VM600 IOC4T