ZMI-2002是單軸或雙軸板，需要較少的背板槽。
它具有簡化的P2接口，意味著單個或多個板可以很容易地總線到單個伺服卡或電機控制器。
ZMI-2002測量板在單個6U
VME板上提供兩個干涉測量軸，測量板可通過接口總線（VME或ISA）或P2接口進行完全編程，標準硬件接口支持高達7.7MHz的P2數(shù)據(jù)速率，適用于多達16個軸，易于擴展以容納以相同的速率使用更多軸，降低集成成本。

不同的測量板有不同的功能和用途，下面以ZMI-2002測量板為例，介紹一下它的功能和用途：
ZMI-2002測量板是單軸或雙軸板，用于測量兩個干涉測量軸，簡化的P2接口意味著單個或多個板可以很容易地總線到單個伺服卡或電機控制器。
它具有以下特點：

單個或多個電路板可輕松總線連接。
標準硬件接口，支持高達7.7MHz的P2數(shù)據(jù)速率。
適用于多達16個軸，易于擴展以容納更多軸。
測量板可通過接口總線（VME或ISA）或P2接口進行完全編程。

ZMI-2002

The ZMI-2002 is a single – or two-axis plate that requires fewer backplane slots.
It has a simplified P2 interface, meaning that a single or multiple boards can be easily bussed to a single servo card or motor controller.
ZMI-2002 measuring board in single 6U
Two interferometric axes are available on the VME board, the measurement board can be fully programmed via an interface bus (VME or ISA) or P2 interface, the standard hardware interface supports P2 data rates up to 7.7MHz, is suitable for up to 16 axes, and is easily scalable to accommodate more axes used at the same rate, reducing integration costs.

Different measuring boards have different functions and uses, the following ZMI-2002 measuring board as an example, to introduce its functions and uses:
The ZMI-2002 measuring boards are single – or dual-axis boards for measuring two interferometric axes, and the simplified P2 interface means that single or multiple boards can be easily bussed to a single servo card or motor controller.
It has the following characteristics:

Single or multiple boards can be easily bussed.
Standard hardware interface that supports P2 data rates up to 7.7MHz.
Suitable for up to 16 axes, easy to expand to accommodate more axes.
The measuring board can be fully programmed via the interface bus (VME or ISA) or P2 interface.

ZMI-2002