8502-B1-DP (Bus Interface Module) BIM提供8000系列/O模塊與a之間的通信鏈路profibus – dp主機。它從模塊中高速采集數據而局域網的運行
速度高達6mbaud,允許主機對快速響應控制過程中的條件。
BIM收集I/O模塊的數據并制作可根據主人的要求提供。它是Profibus主機的一個奴隸。以及循環數據交換，這是讀取輸入所必需的BIM支持
Profibus Extended,支持輸出數據的寫入診斷狀態信息。它還支持許多已經實現的特殊功能，以允許高完整的系統操作和現場維護。
◆連接MTL8000節點到Profibus-DP主機局域網
◆最多支持24個I/O模塊HART過程和狀態變量通過Profibus-DP
◆擴展模塊和通道狀態診斷
◆局域網速度高達6mbaud
◆配置用非易失性存儲器
◆軟件可通過本地端口或Profibus主機配置HART⑧通過通信適配器進行維護
8502支持從Profibus主機進行參數化。這以“每個模塊”為基礎配置，即所有通道都在一個通道上模塊攜帶相同的配置。配置創建于使用GSD文件
中提供的詳細信息的Profibus配置器。此方法速度快，并且可以基于此構建配置在表示物理模塊的”邏輯”模塊上。模塊- -次添加一 -個到配置和參數
被選擇應用于模塊的所有通道。
可以選擇邏輯模塊來提供HART狀態和流程變量在Profibus-DP循環輸入電報。此外，對于在需要訪問許多HART變量的應用程序中可以使用
HART”郵箱”。該技術收集HART變量按要求的;在電報中節省空間，有時過度處理數據。此方法僅在使用時可用參數化。
配置由Profibus主站向下傳遞給BIM在會議開始時。如果系統停止并重新啟動，則配置文件重新傳輸?shù)紹IM。

8502-BI-DP

8502-B1-DP (Bus Interface Module) The BIM provides a communication link between the 8000 series /O modules and A profibus-dp host. It collects data from the module at high speed while running the LAN
Speeds up to 6mbaud allow the host to respond quickly to control conditions during the process.
BIM collects data from I/O modules and makes them available at the owner’s request. It’s a slave to the Profibus mainframe. And cyclic data exchange, which is the BIM support necessary to read the input
Profibus Extended supports writing diagnostic status information to output data. It also supports a number of special features that have been implemented to allow for high integrity system operation and field maintenance.
◆ Connect the MTL8000 node to the Profibus-DP host LAN
◆ Supports up to 24 I/O module HART processes and state variables via Profibus-DP
◆ Expansion module and channel status diagnosis
◆ LAN speed up to 6mbaud
◆ Configure with non-volatile memory
◆ The software can be maintained through a local port or Profibus host configured with HART⑧ via a communication adapter
The 8502 supports parameterization from the Profibus host. This is configured on a “per module” basis, that is, all channels on one channel module carry the same configuration. The configuration is created using a GSD file
Details provided in the Profibus configurator. This method is fast, and builds can be configured based on it on “logical” modules that represent physical modules. Module – Add one – to the configuration and parameters
All channels that are selected to apply to the module.
Logic modules can be selected to provide HART state and process variables in the Profibus-DP loop input telegrams. In addition, it can be used in applications that require access to many HART variables
HART “mailbox”. The technique collects HART variables as required; Saving space in telegrams and sometimes over-processing data. This method can be parameterized only when used.
The configuration is passed down from the Profibus master to the BIM at the beginning of the meeting. If the system stops and restarts, the configuration file is transferred back to the BIM.

8502-BI-DP

8502-BI-DP