DS200DCFBG1BJB 是一塊大型矩形電路板，其表面安裝有大量元件。其中包括七個 4 位 DIP 開關設備和十二個可配置跳線。 六個 DIP 開關一起位于電路板的一側。這些用于縮放或更改許多不同的輸入。例如，4 號開關 (SW4) 用于縮放施加到 VCO 輸出橋電路的電壓。該板還有一個霓虹燈，用于指示 115 VAC 線路中的保險絲熔斷，以及兩個 LED 指示燈，用于指示 +24 VDC 線路和 -24 VDC 線路中的保險絲熔斷。

DS200DCFBG1BJB

其他電路板組件包括測試點、I/O 連接器（1PL-1 至 1PL-40、2PL-1 至 2PL-9、4PL-1 至 4PL-5 和 5PL-1 至 5PL-26）以及保險絲、集成電路、電阻網絡和電阻器、電容器、晶體管、散熱器、變壓器和繼電器。該板上的測試點用于檢查電壓信號。保險絲起保護作用。有關電路板組件及其用途的更多詳細信息，請參閱通用電氣提供的出版物，例如用戶指南和手冊。這些產品通常隨您最初購買的產品一起提供。如果您無法再訪問此材料，AX Control 可能會隨您的訂單一起為您提供替換品。
DS200DCFBG1BJB是由通用電氣公司制造的電路板組件，是MarkV Speedtronic系統的一部分。DS200DCFBG1BJB用于向驅動器和機柜風扇提供控制級電源。DS200DCFBG1BJB用于EX2000應用，以及DC2000、FC2000、GF2000、ME2000、CB2000和AC2000IGBT驅動應用
DS200DCFBG1BJB是一個大型矩形電路板，表面安裝了大量元件。其中包括7個4位DIP開關器件和12個可配置跳線。六個DIP開關一起位于電路板的一側。這些用于縮放或改變許多不同的輸入例如，4號開關(SW4)用于調節施加于VCO輸出橋接電路的電壓該板還有一個氣燈，用于指示115伏交流電線上的保險絲熔斷，還有兩個LED指示燈，用于指示+24伏直流電線和-24伏直流電線上的保險絲熔斷。

DS200DCFBG1BJB

DS200DCFBG1BJB Other board components include test points, I/O connectors (1PL-1 to 1PL-40, 2PL-1 to 2PL-9, 4PL-1 to 4PL-5, and 5PL-1 to 5PL-26), As well as fuses, integrated circuits, resistance networks and resistors, capacitors, transistors, radiators, transformers and relays. A test point on the board is used to check the voltage signal. The fuse is used to protect this single-slot 32-bit PCI card with two rear coaxial (BNC) connectors. The card requires a +5 545 mA (typical) power supply. The storage temperature must be maintained between -40 and 186°F and the operating temperature must be maintained between 32 and 127°F. The storage temperature may be low because the device is not running during storage and therefore does not generate any heat. Once the remote I/O software is loaded, the interface card is able to monitor all data drops on the remote I/O network, access the output data sent from the host to the slave data drop, and monitor the data sent from each slave data drop to the host. AutoMax Programming Executive software (V3.3 or later) allows PCI computers (with this interface card installed) to connect directly to the Reliance DCS network and perform all online programming terminal functions at full network speed.
The DS200DCFBG1BJB is a board assembly manufactured by General Electric as part of the Mark V Speedtronic system. The DS200DCFBG1BJB is used to provide control level power to the driver and chassis fans. The DS200DCFBG1BJB is used in EX2000 applications and DC2000, FC2000, GF2000, ME2000, CB2000 and AC2000 IGBT driver applications.

The DS200DCFBG1BJB is a large rectangular circuit board with a large number of components mounted on its surface. These include seven 4-bit DIP switchgear and twelve configurable jumpers. Six DIP switches are located together on one side of the board. These are used to scale or change many different inputs. For example, the No. 4 switch (SW4) is used to scale the voltage applied to the VCO output bridge circuit. The board also has a neon sign to indicate a blown fuse in a 115 VAC line, and two LED indicators to indicate a blown fuse in a +24 VDC line and a -24 VDC line.

Other board components include test points, I/O connectors (1PL-1 to 1PL-40, 2PL-1 to 2PL-9, 4PL-1 to 4PL-5, and 5PL-1 to 5PL-26) and fuses, integrated circuits, resistance networks and resistors, capacitors, transistors, radiators, transformers, and relays. A test point on the board is used to check the voltage signal. The fuse provides protection. For more detailed information about board components and their uses, please refer to publications provided by GE, such as user guides and manuals. These products usually come with your initial purchase. If you are no longer able to access this material, AX Control may provide you with a replacement along with your order.
The DS200DCFBG1BJB is a circuit board assembly manufactured by General Electric as part of the MarkV Speedtronic system. The DS200DCFBG1BJB is used to provide control level power to drivers and cabinet fans. The DS200DCFBG1BJB is used in EX2000 applications, as well as DC2000, FC2000, GF2000, ME2000, CB2000 and AC2000IGBT driver applications
The DS200DCFBG1BJB is a large rectangular circuit board with a large number of components mounted on the surface. These include seven 4-bit DIP switching devices and 12 configurable jumpers. Six DIP switches are located together on one side of the board. These are used to scale or change many different inputs for example, the No. 4 switch (SW4) is used to adjust the voltage applied to the VCO output bridge circuit. The board also has a gas light to indicate a blown fuse on a 115 volt AC wire, and two LED indicators to indicate a blown fuse on a +24 volt DC wire and a -24 volt DC line.

DS200DCFBG1BJB

DS200DCFBG1BJB GE 電路板組件最先出現在成都陽光熹禾。