IS215ACLEH1B型號是EX2100e系列的一部分，作為應用控制層模塊，通常是基于微處理器的控制器。該板的主要用途是在ISBus和以太網等通信網絡上執行幾種不同的任務。當該板已安裝，它將占據兩個半插槽在EX2100激勵板機架或創新系列驅動器。ACLE板也將位于控制柜內。有許多不同的軟件功能，包括但不限于以下內容:

I/O點和內部布爾強制

應用控制創新系列驅動器

非易失性閃存

在線應用程序配置加載

控制塊

IS215ACLEH1B單板采用以太網連接，使用板上BIOS功能初始化的irq5。ACL板的以太網接口為10baseT或RJ45插孔，位于ACL板的前面板上。作為一個基于微處理器的控制，該板有一個外圍組件互連(PCI)控制器，該控制器將管理不同的輸入和輸出，配置傳輸?shù)絇CI總線以及管理各種存儲功能。

IS215ACLEH1B

IS215ACLEH1B模型還具有128 KB L2緩存，該緩存與PCI控制器一起使用并由其控制，該緩存設置在152 NC緩存線上，該緩存將填充L1和L2緩存之間的線路。ACLE板的另一個特點是一個閃存設備，這個存儲設備位于目標接口的本地總線側，被稱為device 1，該設備只能以字節模式訪問。

IS215ACLEH1B

The IS215ACLEH1B model is part of the EX2100e family as an application control layer module, usually a microprocessor-based controller. The main purpose of the board is to perform several different tasks on communication networks such as ISBus and Ethernet. When the board is installed, it will occupy two and a half slots in the EX2100 drive board frame or Innovation Series drive. ACLE board will also be located in the control cabinet. There are many different software features, including but not limited to the following:

I/O points and internal Boolean coercion

Application control Innovation series drives

Non-volatile flash memory

Online application configuration loading

Control block

The IS215ACLEH1B board uses the Ethernet connection and uses the irq5 initialized by the BIOS function on the board. The Ethernet port on the ACL board is a 10baseT or RJ45 jack on the front panel of the ACL board. As a microprocessor-based control, the board has a Peripheral Component Interconnect (PCI) controller that will manage different inputs and outputs, configure transfers to the PCI bus, and manage various storage functions.

The IS215ACLEH1B model also has a 128 KB L2 cache that is used with and controlled by the PCI controller, which is set on a 152 NC cache line that will fill the line between the L1 and L2 caches. Another feature of the ACLE board is a flash memory device located on the local bus side of the target interface, called device 1, which can only be accessed in byte mode.

IS215ACLEH1B