1747-CP3是USB編程電纜，專門用于與PLC（可編程邏輯控制器）進行通信和編程。它具備兩個9針的DTE連接器，采用RS232接口標準，電纜長度為3米。
這種電纜是工業自動化和控制系統中的關鍵組件，它使得用戶能夠通過個人計算機對PLC進行編程、配置、監控和故障排除。
在實際應用中，1747-CP3編程電纜通常與羅克韋爾自動化的PLC設備一起使用，例如Allen-Bradley的ControlLogix或MicroLogix系列PLC。
用戶可以通過將電纜的一端連接到PLC的串行端口，另一端連接到個人計算機的USB端口，從而實現與PLC的通信。
此外，為了確保通信的穩定性和可靠性，用戶在選擇和使用1747-CP3編程電纜時，應注意以下幾點：
確保電纜與PLC和個人計算機的接口兼容，避免連接錯誤或損壞設備。
在使用過程中，注意保護電纜免受物理損傷，避免過度彎曲或拉扯電纜。
定期檢查和測試電纜的連通性，確保其正常工作。

1747-CP3

The 1747-CP3 is a USB programming cable designed specifically for communication and programming with PLCS (Programmable logic controllers). It has two 9-pin DTE connectors with RS232 interface standard and a cable length of 3 meters.
This cable is a key component in industrial automation and control systems that enables users to program, configure, monitor and troubleshoot PLCS from a personal computer.
In practical applications, the 1747-CP3 programming cable is often used with Rockwell Automation PLC equipment, such as Allen-Bradley’s ControlLogix or MicroLogix series PLCS.
The user can communicate with the PLC by connecting one end of the cable to the serial port of the PLC and the other end to the USB port of the personal computer.
In addition, in order to ensure the stability and reliability of communication, users should pay attention to the following points when selecting and using the 1747-CP3 programming cable:
Ensure that the cable is compatible with the interface of the PLC and the PC to avoid connection errors or damage to the device.
During use, protect the cable from physical damage and avoid excessive bending or pulling of the cable.
Check and test cable connectivity regularly to ensure it is working properly.

其他型號推薦：