基本細節:170190-01E?振動傳感器 能夠在很寬的頻率范圍內測量振動

170190-01E 是一款由Bently Nevada公司制造的振動傳感器。這款傳感器專為工業應用而設計，能夠在很寬的頻率范圍內測量振動，使其能夠檢測到機械性能的微小變化。它的測量范圍可以達到0-5mm/s，頻率范圍為10~1000Hz，工作溫度范圍為-20~80℃。此外，它的輸出信號為4-20mA。
170190-01E振動傳感器常用于石油和天然氣、發電、化學處理以及制造業等行業。在這些領域中，它對于實時監測機械設備的工作狀態，預防潛在故障以及優化設備性能起著關鍵作用。
170190-01E傳感器的安裝步驟通常涉及以下幾個關鍵步驟。請注意，具體的安裝步驟可能因設備型號、應用環境以及制造商的指南而有所不同，因此在實際安裝前，務必參考制造商提供的產品手冊和安裝指南。
以下是170190-01E傳感器安裝的一般步驟：
準備工作：
確保安裝環境符合傳感器的操作要求，包括溫度、濕度、振動等條件。
檢查傳感器和相關附件是否完整無損。
準備必要的安裝工具，如螺絲刀、扳手等。
選擇安裝位置：
選擇一個能夠準確反映設備振動狀態的位置，通常應靠近振動源。
確保安裝位置平整、無油污、無腐蝕，且便于日后的維護和檢查。
安裝傳感器底座：
根據傳感器的尺寸和形狀，在選定的位置上安裝傳感器底座。
使用合適的螺栓和螺母將底座固定牢固，確保底座與安裝面之間的接觸良好。
安裝傳感器：
將傳感器放置在底座上，確保傳感器的方向與振動方向一致。
使用制造商提供的安裝工具，如鎖緊環或鎖緊螺絲，將傳感器固定在底座上。
連接電纜：
根據制造商的指導，將傳感器的輸出電纜與數據采集系統或監測設備連接。
確保電纜連接牢固、無松動，并避免電纜受到過度的拉伸或彎曲。
測試與校準：
在安裝完成后，對傳感器進行測試，確保其工作正常并輸出正確的振動信號。
如果需要，根據制造商的指南對傳感器進行校準，以確保其測量結果的準確性。
完成安裝：
檢查所有安裝步驟是否完成，確保沒有遺漏或錯誤。
清理安裝現場，確保工作區域整潔、安全。

170190-01E

The 170190-01E is a vibration sensor manufactured by Bently Nevada. Designed for industrial applications, this sensor is capable of measuring vibrations over a wide frequency range, enabling it to detect small changes in mechanical properties. Its measuring range can reach 0-5mm/s, the frequency range is 10~1000Hz, and the operating temperature range is -20~80℃. In addition, its output signal is 4-20mA.
The 170190-01E vibration sensor is commonly used in the oil and gas, power generation, chemical processing and manufacturing industries. In these fields, it plays a key role in real-time monitoring the working status of mechanical equipment, preventing potential failures, and optimizing equipment performance.
The 170190-01E sensor installation procedure usually involves the following key steps. Note that the installation procedure may vary depending on the device model, application environment, and the manufacturer’s guide. Therefore, ensure that you refer to the product manuals and installation guides provided by the manufacturer before the actual installation.
The following are the general steps for installing the 170190-01E sensor:
Preparation work:
Ensure that the installation environment meets the operating requirements of the sensor, such as temperature, humidity, and vibration.
Check that the sensor and related accessories are intact.
Prepare necessary installation tools, such as screwdrivers and wrenches.
Select the installation location:
Select a location that accurately reflects the vibration state of the device, usually close to the vibration source.
Ensure that the installation position is smooth, free of oil and corrosion, and convenient for future maintenance and inspection.
Install the sensor base:
Install the sensor base in the selected position according to the size and shape of the sensor.
Secure the base with proper bolts and nuts, and ensure that the base is in good contact with the mounting surface.
Install sensors:
Place the sensor on the base and ensure that the sensor is oriented in the same direction as the vibration.
Attach the sensor to the base using a mounting tool provided by the manufacturer, such as a locking ring or locking screw.
Connecting cable:
Connect the output cable of the sensor to the data acquisition system or monitoring device according to the manufacturer’s instructions.
Ensure that the cable connection is firm and not loose, and avoid excessive stretching or bending of the cable.
Test and calibration:
After the installation is complete, the sensor is tested to ensure that it is working properly and output the correct vibration signal.
If necessary, the sensor is calibrated according to the manufacturer’s guidelines to ensure the accuracy of its measurement results.
To complete the installation:
Check that all installation steps have been completed to ensure that there are no omissions or errors.
Clean up the installation site and ensure that the work area is clean and safe.

如果您需要查詢或購買，請將產品型號發送到我的電子郵件或直接致電我

銷售經理:何經理

手機: + 86 18005021035

郵箱:?18005021035@163.com

▲更多相關型號:170190-01E?振動傳感器 能夠在很寬的頻率范圍內測量振動