控制執行器：模擬輸出模塊可以將數字控制信號轉換為相應的模擬控制信號，用于驅動執行器，如電機、閥門或其他執行器設備。通過控制模擬輸出信號的電壓、電流或頻率等參數，可以實現對執行器的精確控制。

1C31129G03

OVATION 1C31129G03是一種模擬輸出模塊，通常用于工業自動化系統中。模擬輸出模塊的主要作用是將數字信號轉換為模擬信號輸出，以供其他設備或系統使用。

整流模塊地址設置
整流模塊的地址由模塊轉接板上的地址開關設置，整流模塊上無地址設置開關
整流模塊保護
當模塊出現下述問題時，整流模塊將發生保護動作，模塊面板上的黃色指示燈點亮，模塊的保護在其條件消失時，保護自動解除:
交流輸入過壓、欠壓
模塊過溫
整流模塊故障
當整流模塊出現下述問題時，整流模塊將告警為故障，面板上的紅色告警指示燈點亮。如果需要解除此故障，一般情況下必須將模瑛的交流空異關斷5秒以上后重新開啟。

1C31129G03

數據采集與監控：模擬輸出模塊可以將數字數據轉換為模擬信號輸出，用于采集和監控系統中的各種過程變量。例如，它可以將數字信號轉換為模擬電壓或電流，以測量溫度、壓力、流量等物理量，并將這些數據傳輸給監控系統進行處理和顯示。

反饋控制：模擬輸出模塊可以提供反饋信號，用于閉環控制系統中的反饋環節。通過將反饋信號與設定值進行比較，控制系統可以實現自動調節和穩定過程變量。模擬輸出模塊可以生成與實際過程變量相對應的模擬信號，用于控制器的反饋輸入。

1C31129G03

整流模塊地址設置
整流模塊的地址由模塊轉接板上的地址開關設置，整流模塊上無地址設置開關
整流模塊保護
當模塊出現下述問題時，整流模塊將發生保護動作，模塊面板上的黃色指示燈點亮，模塊的保護在其條件消失時，保護自動解除:
交流輸入過壓、欠壓
模塊過溫
整流模塊故障
當整流模塊出現下述問題時，整流模塊將告警為故障，面板上的紅色告警指示燈點亮。如果需要解除此故障，一般情況下必須將模瑛的交流空異關斷5秒以上后重新開啟。

1C31129G03

The role of OVATION 1C31129G03 analog output module may include the following aspects:

Control actuators: The analog output module can convert the digital control signal into the corresponding analog control signal for driving actuators such as motors, valves or other actuator devices. By controlling the voltage, current or frequency of the analog output signal, precise control of the actuator can be achieved.

Data acquisition and monitoring: The analog output module can convert digital data into analog signal output for the acquisition and monitoring of various process variables in the system. For example, it can convert digital signals into analog voltages or currents to measure physical quantities such as temperature, pressure, and flow, and transmit these data to a monitoring system for processing and display.

Feedback control: The analog output module can provide feedback signals for feedback in the closed-loop control system. By comparing the feedback signal with the set value, the control system can automatically adjust and stabilize the process variables. The analog output module can generate analog signals corresponding to the actual process variables for the feedback input of the controller.

OVATION 1C31129G03 is an analog output module commonly used in industrial automation systems. The main function of the analog output module is to convert the digital signal to the analog signal output for use by other devices or systems.

Set the address of the rectifier module
The address of the rectifier module is set by the address switch on the module switching board. There is no address setting switch on the rectifier module
Rectifier module protection
When the following problems occur in the module, the protection action of the rectifier module will occur, the yellow indicator on the module panel will light up, and the protection of the module will be automatically removed when its condition disappears:
Ac input overvoltage or undervoltage
Module overtemperature
The rectifier module is faulty
If any of the following problems occur on the rectifier module, the rectifier module indicates a fault and the red alarm indicator on the panel is on. If you need to remove this fault, under normal circumstances, you must turn off the AC air anomaly of Moying for more than 5 seconds and then re-open.