A2H124-24FX ENTERASYS 以太網交換機系列提供具有成本效益的第二二層式 換在單個堆棧中多達384個10/100端口與16千兆上行鏈路?？煽啃缘闹С直ＷC了可用性閉環堆疊，冗余核心連接,冗余電源選項和冗余棧管理。

每臺A2H124-24FX ENTERASYS 以太網交換機有兩臺mini-GBIC (SFP)接口和兩個固定接口10/100/1000端口，可作為標準以太網上行鏈路，但也可以用于堆疊端口,最多支持2 Gbps的雙向帶寬任意兩個相鄰開關之間。沒有需要額外的堆棧模塊堆疊交換機。單個堆棧可以由..的任意組合組成SecureStack A2開關允許混合24和48端口10/100,100Base -FX和需要連接的以太網上電端口網絡核心采用銅芯，多模光纖和/或單模光纖千兆。實現閉環疊加，哪個保證單開關或堆疊線纜連接故障不會影響整個堆棧操作。

A2H124-24FX

A2H124-24FX ENTERASYS 以太網交換機自動配置，允許堆疊交換單元添加或刪除最小的p acke t中斷。最多8個SecureStack堆疊 支持A2交換機使用單個IP地址完成堆棧管理。冗余ts ac k管理是由- -個ssIgnn g支持的一-個主堆棧和多個輔助堆棧經理。轉換服務支持所有SecureStack A2交換機基于標準的轉換。IEEE交換標準(EEE 802.1DMAC橋接)和IEEE 802.1t (802.1D維護)，以及多重生成樹(IEEE 802.1)和Rapid重收斂(EEE 802.1w),都是充分的支持。

所有開關支持到8000個地址，4個硬件每個端口的隊列。以太網流量控制(EEE 802.3)以及基于標準的鏈路聚合(EEE 802.3ad)完全支持所有交換機型號。
總的來說，ENTERASYS A2H124-24FX P0973BJ交換機模塊具有高性能交換、24個端口、光纖連接、可擴展性、網絡安全、管理和監控，以及節能環保等特點。它是一個功能強大、可靠性高的交換機模塊，適用于各種規模的企業網絡和數據中心。具體的特點和應用取決于用戶的需求和網絡配置。

A2H124-24FX

The A2H124-24FX ENTERASYS Ethernet switch family offers cost-effective Layer 2 switching for up to 384 10/100 ports with 16 gigabit uplink in a single stack. Reliability support ensures availability for closed-loop stacking, redundant core connectivity, redundant power options and redundant stack management.

Each A2H124-24FX ENTERASYS Ethernet switch has two mini-GBIC (SFP) ports and two fixed 10/100/1000 ports, which can be used as standard Ethernet uplink. But it can also be used to stack ports, supporting up to 2 Gbps of bidirectional bandwidth between any two adjacent switches. No additional stack modules are required to stack switches. A single stack can be composed of… Any combination of the SecureStack A2 switches allows mixing 24 and 48-port 10/100,100 Base-FX and Ethernet Ethernet electrical port network cores using copper cores, multimode fiber and/or single-mode fiber gigabits. Closed-loop stacking is implemented, which ensures that the failure of a single switch or stack cable connection does not affect the entire stack operation.

A2H124-24FX ENTERASYS Ethernet switches are automatically configured to allow stacking switching units to add or remove minimal packe t interrupts. A maximum of eight SecureStack switches can be stacked using a single IP address for stack management. Redundant TSK management is supported by one primary stack and multiple secondary stack managers supported by one ssIgnn g. The conversion service supports standards-based conversions for all SecureStack A2 switches. The IEEE Switching standard (EEE 802.1DMAC bridge) and IEEE 802.1T (802.1D maintenance) are fully supported, as are multiple regenerate trees (IEEE 802.1) and Rapid Reconvergence (EEE 802.1W).

All switches support queues of up to 8000 addresses, 4 hardware per port. Ethernet flow control (EEE 802.3) and standards-based link aggregation (EEE 802.3AD) are fully supported for all switch models.
Overall, the ENTERASYS A2H124-24FX P0973BJ switch module features high-performance switching, 24 ports, fiber optic connectivity, scalability, network security, management and monitoring, as well as energy conservation and environmental protection. It is a powerful and reliable switch module for enterprise networks and data centers of all sizes. The specific features and applications depend on the user’s needs and network configuration.

A2H124-24FX