制造商:霍尼韋爾
零件號:CC-PCNT02
C300模塊控制器
原產地:美國
C300控制器CC-PCNT02取代CC-PCNT01，用于新安裝和現場更換
C300控制器必須使用CC-PCNT02型號和C300擴展功能能的擴展功能固件映像(EIM，利潤控制器
僅CC-PCNT02支持利潤控制器集成
C300s通過控制防火墻連接
控制防火墻，CF9充當網絡聚合器
通過以太網連接4臺C300s
霍尼韋爾C300控制器模塊CC-PCNT02/51454551-275
運輸重量:3公斤
HONEYWELL CC-PCNT02 處理器模塊FS-2173-2RP探測器維護內部歷史記錄（事件日志），最多200個事件（火災、故障、重置等）。

CC-PCNT02

這個可以使用帶有至少486型PC和適當?shù)腜C軟件。安裝支架位置a、 探測器具有120度錐形視野（視角）。建議探測器位于主要火災威脅位置探測器視野的軸。由于探測器必須“看到”火災才能探測到它，它應該安裝在角落和天花板等位置避免視線堵塞。b、 選擇將固定探測器與外殼材料類型保持一致地方例如，可以在安裝支架，并用螺釘、鉚釘?shù)裙潭?。如果安裝面為聚丙烯，可進行熱焊接用于固定支架。c、 將外殼滑到安裝支架上，直到它鎖定到位。將每個“引線”連接到適當?shù)倪B接上外部設備。接線見第6節表1細節。小心：在處理探測器的引線。正確使用腕帶接地將有助于防止產品損壞。

CC-PCNT02

Manufacturer: Honeywell
Part number :CC-PCNT02
C300 module controller
Country of Origin: USA
C300 controller CC-PCNT02 replaces CC-PCNT01 for new installation and field replacement
The C300 controller must use the CC-PCNT02 model and the C300 Extended Function capable of the Extended function firmware image (EIM, Profit controller)
Only CC-PCNT02 supports profit controller integration
The C300s is connected through the control firewall
The control firewall, CF9 acts as a network aggregator
Four C300s are connected through Ethernet
Honeywell C300 controller module CC-PCNT02/51454551-275
Shipping weight :3 kg
HONEYWELL CC-PCNT02 Processor module FS-2303-2RP detector maintains an internal history (event log) of up to 200 events (fire, failure, reset, etc.).

This can be used with at least a type 486 PC and appropriate PC software. The detector has a 120-degree conical field of view (Angle of view). It is recommended that the detector be located on the axis of the detector field of view at the primary fire threat location. Since the detector must “see” the fire in order to detect it, it should be installed in places such as corners and ceilings to avoid blocking the line of sight. B. Select the place where the fixed detector is consistent with the material type of the housing. For example, you can install the bracket and fix it with screws, rivets, etc. If the mounting surface is polypropylene, it can be thermally welded for fixing the bracket. c. Slide the housing onto the mounting bracket until it locks into place. Connect each “lead” to the appropriate connected external device. The wiring is detailed in Table 1, Section 6. Caution: In handling detector leads. Proper use of wrist strap grounding will help prevent product damage.

CC-PCNT02