制造商:ABB
產品編號:3BSE018106R1
產品型號:C1855K01 MB 300雙以太網口接口
傳輸速度:10兆比特/秒，200個數據集/秒
CEX總線上的最大單位:12
連接器:RJ-45內螺紋(8針)
典型功耗為24 V。:150毫安
工作溫度:55°C
防護等級:根據IEC 529 EN60529的IP20
尺寸(高x寬x深)，約為:18.5厘米x 5.9cm厘米x 12.75cm厘米
重量:0.7千克
裝運重量:1.5千克
產品編號:3BSE018106R1 ABB型號名稱:C1855K01目錄描:CI855K01 MB 300接口長描:封裝包括:-CI855，MB 300接口模塊-TP853，基板類別產品控制系統產品控制與通信AC 800M AC 800M -通信模塊CI855 MasterBus 300接口C1855K01 MB 300接口產品控制系統800xA控制器AC800M控制軟件AC 800M控制軟生40通信模塊產品控制系統800XA控器AC 800M硬AC 800M4.0通信模塊產品控制系統800xA控制器A800M硬件AC 800M4.1通信模塊產品控制系統800xA控制器AC 800M .附如信息個質:包裝包括:- CI855、MB300接口模塊TP853、基板產品類型:通信 模塊訂購HS編碼:851762-電話機，包括用于蜂窩網絡或其他無線網絡的電話;其他用于發送或接收聲音、圖像或其他數據的裝置，包括用于有線或無線網絡(如局域網或廣域網)通信的裝置，但稅目84.43、85,25、85.27或85.28的發送或接收裝置除外。

CI855K01

用于傳輸或接收語音、圖像或其他數據的其他設備，包括用于在有線或無線網絡(例如局域網或廣域網)中進行通信的設備:-用于接收、轉換和傳輸或再生語音恩像成其他數握的機器，與括本換和路中設備海關種則是·85176200寸產品凈深度長度65 mm產品海度203 mm產品凈157 mm品重:0.62 kg環境RoHS狀態:遵循歐盟指令2011/65/歐盟WEEE類別小型設備(外部尺寸不超過50厘米)電池數量:0
ABB機器人創建信號及關聯信號步驟車間ABB機器人較多，做改善或臨時增加信號需要對機器人的信號進行配置，沒有標準化流程，過程不清晰。1、創建信號之前先到要創建的模塊里確認地址有沒有被占用，創建組信號要查看組信號有沒有包含在內的單個地址，創建單個信號要查看該信號有沒有被別的組信號所包含。2、選擇菜單，控制面板，配置系統參數，signal, 顯示全部3、name:要創建的信號的名字;type of signal: 信號類型;assigned to device:要創建的信號 屬于那個模塊;device mapping:信號的地址。4、選擇菜單，控制面板，配置系統參數，cross connection,顯示全部5、name:要創建的關聯信號的名稱;resultant: 關聯信號的結果;actor1:個條件;invert actor1:個條件是否取反;operator1:跟下 一個條件的關聯關系;actor2:第二個條件; invert actor2:第二個條件是否取反;operator2:跟下一個條件的關聯關系。

CI855K01

Manufacturer :ABB
Product Number :3BSE018106R1
Product model :C1855K01 MB 300 Dual Ethernet port
Transfer speed :10 megabits/SEC, 200 data sets/SEC
Maximum unit on the CEX bus :12
Connector :RJ-45 internal thread (8 pins)
Typical power consumption is 24 V. :150 mah
Operating temperature :55°C
Protection class: IP20 according to IEC 529 EN60529
Dimensions (H x W x D), approximately :18.5 cm x 5.9cm x 12.75cm
Weight :0.7 kg
Shipping weight :1.5 kg
Product Number :3BSE018106R1 ABB Model Name :C1855K01 Catalog Description :CI855K01 MB 300 Interface Long Description: Package includes :-CI855, MB 300 interface module -TP853, Baseboard Category Product Control System Product Control and Communication AC800M AC800M – Communication module CI855 MasterBus 300 interface C1855K01 MB 300 Interface Product Control System 800xA Controller AC800M Control software AC 800M control Software 40 Communication module Product control System 800XA controller AC 800M Hard AC 800M4.0 Communication module Product control system 800xA controller A800M Hardware AC 800M4.1 Communication module Product control system 800xA controller AC 800M. The package includes :- CI855, MB300 interface module TP853, substrate product type: Communication module order HS code :851762- telephone, including telephones for cellular networks or other wireless networks; Other devices used to transmit or receive sound, images or other data, including devices used to communicate over a wired or wireless network, such as a local or wide area network, other than transmitting or receiving devices under heading 84.43, 85,25, 85.27 or 85.28.
– Other equipment used to transmit or receive voice, images or other data, including equipment used to communicate in a wired or wireless network (such as a local area network or a wide area network) :- Machines used to receive, convert and transmit or reproduce voice data into other data sets, The customs type of equipment with this replacement and road is ·85176200 inch product Net depth Length 65 mm product sea degree 203 mm product net 157 mm product weight :0.62 kg Environmental RoHS status: comply with EU Directive 2011/65/ EU WEEE category Small equipment (external size does not exceed 50 cm) Number of batteries :0
There are many ABB robots in the workshop to create signals and associate signals. To improve or temporarily increase signals, the signals of robots need to be configured. There is no standardized process and the process is not clear. 1, before creating a signal, go to the module to be created to confirm whether the address is occupied, create a group signal to check whether the group signal is included in a single address, create a single signal to check whether the signal is included in other group signals. 2. Select Menu, Control Panel, and configure system parameters, signal, to display all 3. name: indicates the name of the signal to be created. type of signal; type of signal; assigned to device: Which module the signal to be created belongs to; device mapping: indicates the address of a signal. 4, select menu, Control panel, configure system parameters, cross connection, display all 5, name: to create the name of the associated signal; resultant: The result of the associated signal; actor1: a condition; invert actor1: whether a condition is inverted; operator1: association with the next condition; actor2: Second condition; invert actor2: whether the second condition is inverted; operator2: The relation to the next condition.

CI855K01