DS200ADGIH1AAA
是GE Fanuc生產的VersaMax系列屏障型I / O載體。它由36個柵欄式端子組成， 并為一個輸入輸出模塊提供背板通信和現場布線。
突出的功能包括將模塊地固定在托架中的閂鎖孔和為接線端子提供覆蓋的透明鉸鏈門。每個輸入輸出模塊都帶有印刷線路卡標簽，可以疊并到鉸鏈門中。每當需要額外的總線連接點時，下邊緣上的凹口用于連接輔助輸入輸出端子排。
IC2CHS1可以卡入7.5 mm x 35 mm DIN導軌。為了照顧電磁兼容性（EMC），將DIN導軌接地重要。導軌具有導電腐蝕涂層，是未上漆的。如果應用需要地抵機械振動，則IC2CHS1也安裝在面板上。
GE輔助接口板DS200ADGIH1AAA具有-個40針連接器、60跳線和一個6針連接器GE輔助接口板DS200ADGIH1AAA也裝有多測試點，這塊木板有8英寸寬，DS200ADGIH1AAA長6英寸，設計用于安裝在變頻器的機柜中。它有四個釘，它們與板架上的一個位置對齊，以便用螺釘安裝。

DS200ADGIH1AAA

測試點提供了一種測試電路板上電路的方法，但是，只有合格的維修人員才能測試主板。服務人員必須擁有為該任務而校準和設計的測試設備?？刂蒲b置必須正確設置，探頭必須設計為與測試儀一起使用。將電路板放在平坦的表面上，并在電路板下放置一個保護袋。
此外，由于靜電風險，維修人員必須始終佩戴腕帶。正確安裝腕帶后，腕帶的一端系在您的手腕上，另一端來在工作臺或書桌的全屋服上。它如可以連接到其他金屬結構上。靜電被吸引到金屬地面，并離開電路板或您的身體。減少靜電積累的另一個適當?shù)牟铰毷牵趯㈦娐钒逦赵谑种袝r(shí)，避免四處移動。行走的座擦導致靜電積聚、在涼爽干煤的天氣條件下尤其如此。如果沒有腕帶，您也可以將裝有沖浪板的靜電包接觸到金屬結構，如椅子或金屬桌腿。
VME總線是一種通用的計算機總線，結合了Motorola公司Versa總線的電氣標準和在歐洲建立的Eurocard標準的機減形狀因子，是一種。它定義了一個在緊密合(closely coupled) 硬件構架中可進行互連數據處理、數據存儲和連接外圍控制件的系統，經過多年的改造升級，VME系統已經發展的非常完善，圍繞其開發的產品遍及了工業控制、軍用系統、航空航天、交通運輸和醫療等領域。VME數據傳輸機制是異步的，有多個總線周期，地外寬度是16、24、32、4064位，數據線路的寬度是8、16、24、32、64位，系統可以動本的選擇它們。它的數據傳輸方式為異步方式，因此只受制于信號交換協議，而不依賴于系統時鐘，其數據傳輸速率為0~ 500Mb/s;此外，還有UnalignedData傳輸能力，差糾正能力和自我診斷能力，用戶可以定義/0端口:其配有21插卡插博和多人背板，在至事應用中可以使用傳導冷卻模塊。
一個部分是它的機械構架，此部分決定著VMEbus 系統背板、前置面板和嵌入板因?yàn)槭莾煞N標準的結合，那么VME系統也可以被看作是兩個部分。
的尺寸大小;而令一部分則是功能構架，它定義了系統的運轉流程。

DS200ADGIH1AAA

DS200ADGIH1AAA
It is the VersaMax series barrier I/O carrier produced by GE Fanuc. It consists of 36 palisade terminals and provides backplane communication and field wiring for an input/output module.
Prominent features include latch holes that anchor the module to the carrier and transparent hinged doors that provide cover for the terminal. Each input/output module comes with a printed line card label that can be folded and inserted into the hinged door. Whenever additional bus connection points are required, a notch on the lower edge is used to connect the auxiliary input/output terminal block.
The IC2CHS1 can be clipped into a 7.5mm x 35 mm DIN rail. To take care of electromagnetic compatibility (EMC), it is important to ground the DIN rail. The guide rail has a conductive corrosion coating and is unpainted. If the application requires ground resistance to mechanical vibration, the IC2CHS1 is also mounted on the panel.
The GE auxiliary interface Board DS200ADGIH1AAA has – 40 pin connectors, 60 jumpers, and a 6-pin connector The GE auxiliary interface board DS200ADGIH1AAA is also equipped with multiple test points. The board is 8 inches wide and the DS200ADGIH1AAA is 6 inches long and is designed to be installed in the inverter cabinet. It has four nails, which are aligned with a position on the board frame for installation with screws.
The test point provides a way to test the circuit on the board, however, only qualified maintenance personnel can test the motherboard. Service personnel must have test equipment calibrated and designed for the task. The control device must be set up correctly and the probe must be designed for use with the tester. Place the board on a flat surface and place a protective bag under the board.
In addition, due to the risk of static electricity, maintenance personnel must always wear wristbands. When the wristband is properly installed, one end of the wristband is attached to your wrist and the other end is attached to the whole room of the workbench or desk. It can be attached to other metal structures. Static electricity is attracted to the metal floor and leaves the circuit board or your body. Another appropriate step to reduce static buildup is to avoid moving the board around while holding it in your hand. Walking scrubs cause static electricity to build up, especially in cool, dry coal weather. If you don’t have a wristband, you can also touch the static bag containing the surfboard to a metal structure, such as a chair or metal table leg.
The VME bus is a general-purpose computer bus that combines the electrical standard of Motorola’s Versa bus with the reduced form factor of the Eurocard standard established in Europe. It defines a system that can interconnect data processing, data storage, and peripheral controls in a closely coupled hardware architecture. After years of upgrading, the VME system has developed very well. Products developed around it span the fields of industrial control, military systems, aerospace, transportation and medical. The VME data transmission mechanism is asynchronous, there are multiple bus cycles, the outer width is 16, 24, 32, 4064 bits, the width of the data line is 8, 16, 24, 32, 64 bits, the system can choose them manually. Its data transmission mode is asynchronous, so it is only subject to the signal exchange protocol, and does not rely on the system clock, and its data transmission rate is 0~ 500Mb/s; In addition, there is UnalignedData transmission ability, poor correction ability, and self-diagnostic ability, users can define the /0 port: it has a 21-card plug-in and multi-player backplane, can use conductive cooling module in the most important applications.
One part is its mechanical structure, which determines the VMEbus system backplane, front panel and insert plate because it is a combination of two standards, then the VME system can also be regarded as two parts.
The size of; The other part is the functional architecture, which defines the flow of the system.

DS200ADGIH1AAA