通信和集成
在線模塊更換，確保連續運行和工廠可用性與Foxboro Evo過程自動化系統和所有主要分布式控制系統(DCSS)集成全面的I/0模塊系列多達254個點對點通信節點
阿基里斯1級網絡安全認證
維護
內置診斷和冗余管理一對用戶透明
用于狀態和故障分析的簡單診斷
在線修改和更改、在線模塊更換和熱備盤插槽，可在不中斷運營的情況下實現連續生產適用于安全生命周期每一步的全套軟件工具(TriStation套件)
Triconex Systerm 3601T 115VAC數字輸出模塊

PI3381

PI3381-Tricon的雙冗余電池組位于機架背板上的正面，在I/O擴展口的旁邊。如發生電源故障的情況，這些鋰電池能夠保存數據和程序，累計保持時間為六個月，所以Tricon建議每五年更換一次電池（鋰電池），或者在他們累計使用六個月之后更換。
在正常環境中，兩個電源模件都是工作的，每一個都向Tricon供電，這時只有PASS和POWER兩個指示器燈亮(ON)，任何一個電源模件都可在一定時間內單獨給機架.電源模件可以在線更換，視為熱備。
TRICONEX原裝PI3381卡件系統DCS工控備件
數字輸出(DO)模件之一出現了LOAD/FUSE錯誤。-系統中某個地方的模件缺失。-主機架內有一個主處理器或I/O模件故障。
擴展機架中某個在線I/O模件故障。如果在某一擴展機架內的某I/O模件內有著一支路故障但還能繼續正確地運行或者把控制傳遞給了熱備，則主機架報警不會發動。-主處理器探測到有一系統故障。在這個情況下，兩個報警觸點都有可能被發動二沒有相應的模件故障。-機架之間的I/O總線電纜安裝不正確（列如支路A的電纜不小心被連到了支路B上）Tricon RS-485擴展總線口的使用

PI3381

Communication and integration
Online module replacement ensures continuous operation and plant availability with the Foxboro Evo process automation system and all major distributed control systems (DCSS) integrated comprehensive I/0 module family of up to 254 point-to-point communication nodes
Achilles Level 1 Network security certification
maintenance
Built-in diagnostics and redundancy management are transparent to users
Simple diagnostics for status and fault analysis
Online modifications and changes, online module replacements and hot spare disk slots for continuous production without disruption to operations a complete suite of software tools for every step of the security lifecycle (TriStation suite)
Triconex Systerm 3601T 115VAC digital output module

The PI3381-Tricon’s dual redundant battery pack is located on the front side of the rack backplane, next to the I/O expansion port. In the event of a power failure, these lithium batteries are able to hold data and programs for a cumulative retention time of six months, so Tricon recommends replacing the batteries every five years (lithium batteries), or after they have been used for six months.
In a normal environment, both POWER modules are working, each supplying power to the Tricon, when only the PASS and Power indicators are ON, and either power module can be fed to the rack alone for a certain amount of time. The power module can be replaced online, which is considered as hot backup.
TRICONEX original PI3381 card system DCS industrial control spare parts
A LOAD/FUSE error occurred in one of the Digital Output (DO) modules. – A module is missing somewhere in the system. – One main processor or I/O module in the host subrack is faulty.
An online I/O module in the extension rack is faulty. If there is a branch fault in an I/O module in an expansion rack but continues to function correctly or transfers control to hot spare, the frame alarm does not activate. – The main processor has detected a system failure. In this case, both alarm contacts may be activated without the corresponding module failure. – I/O bus cables between racks are incorrectly installed (for example, cables from Branch A are accidentally connected to Branch B) Tricon RS-485 expansion bus port

PI3381