KOLLMORGEN S20330-SRS 科爾摩根 伺服系統控制器

為了實現高性能伺服控制領域，S20330-SRS提出了一種適用于永磁直線同步電機的帶死區參數修正的自適應反推互補滑?？刂品椒?。在反演控制和滑?？刂频睦碚摶A(chǔ)上，設計了一種強魯棒控制器ABCSMC，用于補償系統中出現的參數變化和外部擾動等不確定性。此外，自適應飽和函數的使用避免了參數選擇的困難，使得自適應律可以實時調整最優參數。

此外，KOLLMORGEN 為了避免自適應律的參數漂移現象，提出了死區參數修正方法，通過設置性能閾值來解決過訓練問題。最后，通過李亞普諾夫定理和巴爾巴拉特引理證明了系統的穩定性。為了檢驗所提出方案的性能，S20330-SRS實現了一個基于數字信號處理器的實驗平臺。比較結果表明，所提出的控制器能夠獲得更高的跟蹤性能，并對參數變化和外部干擾的不確定性具有更強的魯棒性。

S20330-SRS

科爾摩根進入自動化工業帶來了運行金屬加工應用程序的新方法，智能液壓,精確幾何三維切割，以及金屬添加制造?？茽柲Ω欧?qū)動器在額定持續電流下，每5秒鐘的診斷控制次數增加3倍。這些驅動器的額定功率介于最大50，000瓦和最小300瓦的連續工作功率輸出之間。隨著速率峰值操作的增加，Kollmorgen伺服驅動器能夠部署在需要較小伺服驅動器的應用中。

這科爾摩根S20330-SRS是一個伺服驅動在……里S200系列。驅動器有一個SynqNet選項卡為了便于輕松連接到SynqNet網絡。SynqNet是對以太網網絡它采用同步網絡技術設計，著眼于高性能多軸運動控制應用。這s 20330-安全氣囊系統通過RJ45連接支持網絡連接。對于輸入電壓，驅動器的工作電壓范圍從20伏DC到90伏DC。在0.0 ARMS下，驅動器的最小峰值電流時間從3.0秒開始，而在0.0攝氏度和50.0攝氏度之間的環境溫度下，其峰值輸出電流的額定值為9.0 ARMS。

這科爾摩根S20330-SRS伺服驅動器是第一批具有速度環路帶寬的ll數字驅動器高達800赫茲。S20330-SRS提供獨一無二的系統吞吐量，并支持簡化的調諧。該驅動器具有SFD/霍爾反饋支持。請注意，驅動器的可靠性和/或封裝尺寸不會影響其性能

S20330-SRS

KOLLMORGEN S20330-SRS Kollmorgen servo system controller

In order to realize high performance servo control field, S20330-SRS proposes an adaptive backward thrust complementary sliding mode control method with dead zone parameter modification for permanent magnet linear synchronous motors. Based on the theory of inverse control and sliding mode control, a robust controller ABCSMC is designed to compensate the uncertainties such as parameter changes and external disturbances in the system. In addition, the use of adaptive saturation function avoids the difficulty of parameter selection, so that the adaptive law can adjust the optimal parameters in real time.

In addition, in order to avoid the phenomenon of parameter drift of the adaptive law, KOLLMORGEN proposed a method of dead zone parameter correction to solve the over-training problem by setting a performance threshold. Finally, the stability of the system is proved by Lyapunov’s theorem and Balbalat’s lemma. In order to test the performance of the proposed scheme, S20330-SRS implements an experimental platform based on digital signal processor. The comparison results show that the proposed controller can achieve higher tracking performance and is more robust to the uncertainty of parameter change and external interference.

Colmorgan’s entry into the automation industry brings new ways to run metalworking applications, intelligent hydraulics, precise geometric 3D cutting, and metal additive manufacturing. Kollmorgen servo drives triple the number of diagnostic controls per 5 seconds at rated continuous current. These drivers are rated between a maximum of 50,000 watts and a minimum of 300 watts of continuous operating power output. With the increase in rate peak operation, Kollmorgen servo drives can be deployed in applications that require smaller servo drives.

This Kollmorgen S20330-SRS is a servo drive in… The S200 series. The drive has a SynqNet TAB to facilitate easy connection to the SynqNet network. SynqNet is an Ethernet network designed with synchronous network technology, focusing on high-performance multi-axis motion control applications. This s 20330- airbag system supports network connection via RJ45 connection. For input voltages, the driver operates from 20 volts DC to 90 volts DC. At 0.0 ARMS, the driver’s minimum peak current time starts at 3.0 seconds, while at ambient temperatures between 0.0 degrees Celsius and 50.0 degrees Celsius, its peak output current is rated at 9.0 ARMS.

This Kollmorgen S20330-SRS servo driver is the first ll digital driver with speed loop bandwidth up to 800 Hz. The S20330-SRS provides unique system throughput and supports simplified tuning. The drive has SFD/ Hall feedback support. Please note that the reliability and/or package size of the drive does not affect its performance

S20330-SRS