IC698CPE040-FJ中央處理單元由GE Fanuc在GE RX7i PACSystem產品線中設計和制造，并盡可能強大。IC698CPE040-FJ以其快速的程序和應用程序執行速度、相當大的內存容量以及易于升級的能力而聞名。這種CPU可以使用很長時間，因?yàn)樗梢赃m應升級，使其能夠跟上新技術和新的工業應用要求。IC698CPE040-FJ設計用于RX7i PACSystem PLC或可編程邏輯控制器。IC698CPE040-FJ的負載要求在5伏DC時為6.8安培，在12伏DC和-12伏DC時為0.003安培。
IC698CPE040-FJ上的第一個固件端口是一個RS-232兼容端口，帶有一個指示燈，指示該端口的活動。第二個固件端口兼容RS-485，需要屏蔽電纜進行連接。第三個端口與第一個固件端口一樣，是RS-232兼容端口。
IC698CPE040-FJ
The IC698CPE040-FJ central processing unit is designed and manufactured by GE Fanuc in the GE RX7i PACSystem product line and is as powerful as possible. The IC698CPE040-FJ is known for its fast program and application execution speed, considerable memory capacity, and ability to easily upgrade. This CPU can last a long time because it can accommodate upgrades, allowing it to keep up with new technologies and new industrial application requirements. The IC698CPE040-FJ is designed for use with RX7i PACSystem PLC or programmable logic controller. The load requirements for the IC698CPE040-FJ are 6.8 amps at 5 volt DC and 0.003 amps at 12 volt DC and -12 volt DC.
The first firmware port on the IC698CPE040-FJ is an RS-232 compatible port with an indicator indicating the activity of that port. The second firmware port is compatible with RS-485 and requires a shielded cable for connection. The third port, like the first firmware port, is an RS-232 compatible port.
IC698CPE040-FJ
其他型號推薦：
| 5X00062G01?EMOD?ASSY,?ANALOG?OUTPUT?–?HART?8CH?4-20MA | ||||||||
| 5X00070G04?EMOD?ASSY,?ANALOG?INPUT?8CH?–?14BIT?MED-SPEED?(20,?50?&?100MV) | ||||||||
| 5X00106G01?EMOD?ASSY,?ANALOG?INPUT?8CH?–?HART?HIGH?PERF. | ||||||||
| 5X00109G01?PMOD?ASSY,?ANALOG?INPUT?8CH?HART?HI-PERF. | ||||||||
| 5X00109G02?PMOD?ASSY,?ANALOG?INPUT?8CH?HART?HI-PERF.?W/?CURRENT?LIMITING | ||||||||
| 5X00119G01?EMOD?ASSY,?RTD?INPUT?8CH | ||||||||
| 5X00167G01?EMOD?ASSY,?ANALOG?OUTPUT?–?HART?4CH?HIGH?PERF. | ||||||||
| 5X00208G01?PC?BD?ASSY?DIR,?QPDO?–?QBO?(60V?300MA)?QLINE?MIGRATION?QPCARD | ||||||||
| 5X00226G03?MODULE?ASSY,?CTLR?I/O?INTERFACE?W/?BLOCK?TRANSFER?&?EXT?REG?PROTOCOL | ||||||||
| 5X00228G01?PC?BD?ASSY?DIR,?QPTO?–?QTO?QLINE?MIGRATION?QPCARD | ||||||||
| 5X00357G05?EMOD?ASSY,?ENHANCED?EVENTS?INPUT?16CH?(24V?DIFFERENTIAL?W/WIRE?BREAK?DETECTION) | ||||||||
| 5X00419G02?EMOD?ASSY,?ETHERNET?LINK?CONTROLLER?W/?TIME?STAMP | ||||||||
| 5X00481G01?MODULE?ASSY,?OCR1100?CONTROLLER?–?ATOM?CPU?(COPPER?RJ45) |
IC698CPE040-FJ
